LED Street Light
Engineering Quality Street Light
Different designs have been created that incorporate various types of LEDs into a light fixture. Either few high-power LEDs or many low-power LEDs may be used. The shape of the LED street light depends on several factors, including LED configuration, the heat sink used with the LEDs and aesthetic design preference.
Langy LED Street Light:
LED Street Light
The LED street light is an integrated light that uses light emitting diodes (LED) as its light source. These are considered integrated lights because, in most cases, the luminaire and the fixture are not separate parts. In manufacturing, the LED light cluster is sealed on a panel and then assembled to the LED panel with a heat sink to become an integrated lighting fixture.
Different designs have been created that incorporate various types of LEDs into a light fixture. Either few high-power LEDs or many low-power LEDs may be used. The shape of the LED street light depends on several factors, including LED configuration, the heat sink used with the LEDs and aesthetic design preference.
Heat sinks for LED street lights are similar in design to heat sinks used to cool other electronics such as computers. Heat sinks tend to have as many grooves as possible to facilitate the flow of hot air away from the LEDs. The area of heat exchange directly affects the lifespan of the LED street light.
LED Street Light
Most LED street lights have a lens on the LED panel, which is designed to cast its light in a rectangular pattern, an advantage compared to traditional street lights, which typically have a reflector on the back side of a high-pressure sodium lamp. In this case, much of the luminance of the light is lost and produces light pollution in the air and surrounding environment.
A drawback of LED focus panels is that most light is directed to the road, and less light to the footpaths and other areas. This can be addressed by the use of specialized lens design and adjustable mounting spigots.
In performing a LED street lighting project, easy LED luminary models simplify the optimization for high-performance illumination designs.These practical equations may be used to optimize LED street lighting installations in order to minimize light pollution, increase comfort and visibility, and maximize both illumination uniformity and light utilization efficiency.
Advantages of LED street lights
Low energy consumption: Many LED lighting retrofits have been claimed to dramatically reduce energy use.
Long and predictable lifetime: The projected lifetime of LED street lights is usually 10 to 15 years, the less frequent need to service or replace LEDs will mean lower maintenance cost.
More accurate color rendering: The color rendering index is the ability of a light source to correctly reproduce the colors of the objects in comparison to an ideal light source. Improved color rendering makes it easier for drivers to recognize objects.
Quick turn on and off: Unlike fluorescent and high-intensity discharge (HID) lamps, such as mercury vapor, metal halide, and sodium vapor lamps, which take time to heat up once switched on, LEDs come on with full brightness instantly.
Immediate restart: Unlike mercury vapor, metal halide and sodium vapor lamps, LEDs do not have a problem restarting immediately (hot ignition) following a brief power failure or inadvertent turn off.
RoHS compliance: LEDs don’t contain mercury or lead, and don’t release poisonous gases if damaged.
Less attractive to nocturnal insects: Nocturnal insects are attracted to ultraviolet light emitted by many conventional light sources.
Optically efficient lighting equipment: Other types of street lights use a reflector to capture the light emitted upwards from the lamp. Even under the best of conditions, the reflector absorbs some of the light. Also for fluorescent lamps and other lamps with phosphor coated bulbs, the bulb itself absorbs some of the light directed back down by the reflector. The glass cover, called a refractor, helps project the light down on the street in a desired pattern but some light is wasted by being directed up to the sky (light pollution). LED lamp assemblies (panels) can send light in the desired directions without a reflector.
Reduced glare: Directing the light downward onto the roadway reduces the amount of light that is directed into driver’s eyes.
Higher light output even at low temperatures: While fluorescent lights are comparably energy efficient, on average they tend to have lesser light output at winter temperatures.
Certificate
Our Latest Solar Street Lights Applications
Why Go Solar Power?
Experience Uninterrupted Power
Customer Reviews
Your Savings
Your Power
Our Promise
Save Thousands
Typical customers will see over $60,000 in solar and battery savings.
Custom Designed
Our team of Engineers will design Solar, Battery, and Roof solutions to meet your Home's needs.
Solar Guarantee
Our Sunny-Safeguard guarantee gives you peace of mind for your system for 25 years.
- Two Easy ways to Reach LANGY, Fill out the form Below
- Contact Us Now!
- Phone: +1-800-518-3280(United States & Canda)
- Email: Wade@langy.cc
- Phone: +86-18670113026(China mainland)
- We provide these services:
- OEM/ODM
- Custom Design
- Wholesale